Samaro at JEC World 2026: 3 days to talk composites… and practical solutions- Hall 6 – Stand G74

JEC World is the global meeting point for composite materials: innovations, live demos, technical discussions, and application ideas… In three days, everything accelerates. In 2026, the event takes place from March 10 to 12 at Paris Nord Villepinte Exhibition Centre.

Samaro will be there — Hall 6, Stand G74.
The goal is simple: make you want to stop by… and, above all, leave with clear, actionable directions for your composite projects and bonding challenges.

Why visit Samaro’s booth 6G74?

Because we cover the “composites” value chain in a pragmatic way

In real life, your challenges don’t come down to “a resin” or “a fabric.” You have to deal with:

• processing constraints (time, temperature, takt time, tooling),
• mechanical performance and durability targets,
• repairability, industrialization, and process quality requirements,
• inevitable trade-offs between cycle time / robustness / cost / workshop safety.

At Samaro, our strength is being right at the interface, with an “shop floor + application” mindset:

• Reinforcements: fibers, fabrics, nonwovens
• Resins & systems for lay-up / infusion / casting
• Core materials
• Adhesives for assembly and the design of optimized composite structures

🎯 The approach: co-develop the most relevant solution with you, factoring in shop-floor constraints and product objectives. Not a “catalog” answer — a solution you can actually implement.

Because you’ll meet key partners in one place

At Stand G74 (Hall 6), Samaro represents recognized brands, including:

• Huntsman (Araldite®, Epocast®, Epibond®, Aradur®, Uralane®)
• Airtech
• Porcher-Industries
• Dow — Silastic™
• 3D-Core
• Duna-Corradini

In short: a useful stop if you want to challenge an idea against technical reality, compare options, or move fast on material / adhesive / process selection.

The 2026 highlight: the next generation of non-CMR* and BPA-free* epoxies

In 2026, we will showcase a major step forward: next-generation epoxy adhesives designed to meet today’s industrial expectations, with a non-CMR and BPA-free* approach (*no intentional addition).

At the booth, you’ll be able to discover (and discuss applications) around several key references:

• Araldite® 2014-3: dark grey epoxy, excellent chemical and thermal resistance (up to 160°C) and high mechanical strength.
• Araldite® 2012-1: a low-viscosity two-component “fast-cure” epoxy, ideal for quick, high-strength assemblies.
• Araldite® 2013-2: black epoxy, thixotropic “non-sagging,” long open time, used in industry, automotive, aerospace…
• Araldite® 2015-2: excellent resistance to water and humidity.
• Araldite® 2020-1: transparent, low-viscosity epoxy for casting applications.
• Araldite® AV138 M-2: low-outgassing epoxy with excellent chemical resistance.

👉 The point isn’t to “list products.” The point is to help you answer the key questions:
Which system for which constraint? Which process route? Which performance? Which cycle-time/performance trade-off?

And if you want productivity (without the smell): ARALDITE® “low odor” MMA range

MMA (methyl methacrylate) adhesives are known for their adhesion, speed, and mechanical performance — but historically, odor could be a barrier on the shop floor.

The ARALDITE® low-odor range was formulated to reduce up to ~90% perceived odor emissions versus standard MMAs, while maintaining excellent performance and — depending on the grade — primerless application on metals/plastics.

🔧 In practice, if you want to:

• speed up your production,
• simplify surface preparation,
• bond multi-material assemblies,
  … while improving workshop comfort, come and discuss it at the booth.

4 typical use cases to challenge onsite

Not sure where to start? Here are common topics where a 20-minute discussion can save weeks:

1) Metal/composite (or composite/composite) structural bonding
Adhesive selection, bondline thickness, tolerances, surface prep, environmental resistance: we review constraints and guide you toward a robust, industrializable approach.

2) Inserts, fixings, load transfer zones
How to secure inserts reliably? What’s the best balance between stiffness, durability, and process time? What options work best for casting vs bonding? You leave with testable directions.

3) Weight / cycle time / repairability optimization
Lightweighting without compromising robustness, faster production without losing quality — it’s usually a “system” question (materials + process + assembly), not a single product choice.

4) Composite repair and maintenance
Repairability, field conditions, compatibility, key application steps: we can help you frame a strategy and avoid blind trial-and-error.

Who is this booth for?

If you work on:

• structural composite parts (aerospace, automotive, industrial, sports & leisure, energy…)
• assembly topics (metal/composite, composite/composite, inserts, multi-material bonding)
• optimization goals (weight, durability, cycle time, repairability)
  … then a stop at Stand G74 will save you time.

Get your visitor badge (and block 20 minutes to stop by)

To get your free badge:

• create or access your JEC World Visitor Space,
• order your badge and add it to your cart,
• enter the promo code EXH1495753197 in the dedicated field,
• validate your order.

💡 Tip: block 20 minutes in your JEC agenda to stop by. On a trade show, that small slot often makes the difference.

Practical info to plan your visit smoothly

JEC World also indicates free shuttle buses between Paris-Charles de Gaulle Airport (main terminals) and Paris Nord Villepinte, with regular departures.
(And if you’re coming from Paris, shuttle/access options are generally available depending on your departure point.)

Dates & opening hours:

• March 10 & 11, 2026: 9:00 am – 6:00 pm
• March 12, 2026: 9:00 am – 5:00 pm
  Venue: Paris Nord Villepinte

Samaro: Hall 6 — Stand G74 (listed in the exhibitor directory / interactive map).

❓FAQ – What people often ask before JEC World

🔹Where can I find Samaro at JEC World 2026?
Hall 6 — Stand G74, Paris Nord Villepinte, March 10–12, 2026.

🔹Can I bring a real application case?
Yes — that’s the best way. A part, a photo, a drawing, a spec sheet… we love shop-floor topics.

🔹What bonding topics can you support?
Metal/composite, composite/composite, inserts, multi-material bonding, bondline optimization, and system selection based on shop-floor constraints.

🔹Are you showcasing new products in 2026?
Yes: the next generation of non-CMR and BPA-free epoxies** (*no intentional addition) and the ARALDITE® low-odor MMA range.

🔹Can you help me balance cycle time and performance?
Absolutely. That’s exactly what we focus on: open time, cure speed, viscosity, robustness, and process repeatability.

🔹How do I get a free visitor badge?
Through the JEC World Visitor Space, by entering promo code EXH1495753197 during badge purchase.

🔹Are there shuttle buses?
JEC World indicates free shuttles between Paris-CDG and Paris Nord Villepinte (check official visitor info for details).

🔹How can I contact Samaro after the show?
Call us or fill out the contact form — one of our technicians will get back to you with recommendations and next steps.