Adhésives & Sealants

With over 50 years of experience in the distribution of industrial adhesives and sealing solutions, Samaro has a portfolio of products selected for their high performance. Specialty adhesives from a wide range of technologies: epoxy adhesives, UV adhesives, cyanoacrylate adhesives, silicone adhesives, polyurethane adhesives... to meet the specific needs and diversity of industrial applications.

Among this considerable range of bonding solutions, the challenge is to define the technology that is perfectly adapted to the assembly that you wish to achieve - instant, flexible, contact or structural bonding - and to the conditions in which it will be carried out. A successful bonding operation is always the result of three factors: product selection, surface preparation and control of adhesive application.

Bonding, an assembly technique with many advantages

Among the many assembly techniques available to manufacturers, welding, riveting, screwing, bolting... bonding offers serious advantages:

It allows the assembly of materials of different nature
It offers an excellent resistance
It ensures a perfect seal
It preserves the integrity of the parts
It makes structures lighter

So many advantages that make bonding a preferred technology. Especially in industrial sectors such as railways, aeronautics or automotive for which weight and material savings represent obvious competitive advantages.
See more See less

By brands

MOLYKOTE
ARALDITE
DOWSIL
KRYTOX
SILASTIC
SYLGARD
BOSTIK
PERMABOND
ELECTROLUBE
MERBENIT
XIAMETER
REN
DEVCON
SOCOMORE
DUNA CORRADINI
VOLTALEF
AIRTECH
SYNTHENE
TECTYL
OSIXO
HB FULLER
HERAEUS

Industrial Adhesives and Sealing Solutions

From high-performance structural bonding to durable sealing, chemical assembly solutions now meet virtually every industrial requirement, often where welding, screwing or riveting reach their limits in terms of stress distribution, flexibility or material compatibility.

Samaro distributes a comprehensive range of industrial adhesives and sealants selected from leading brands including Araldite®, Dowsil™, Permabond, Merbenit®, Born2Bond™, Epocast®, Epibond®, Uralane® and Sulzer Cox.

 

What bonding and sealing technologies are available?

Each technology follows a different chemical, mechanical and application logic. Understanding these differences is the first step towards selecting the right solution.

Epoxy adhesives

Widely used for permanent structural assemblies involving metals, composites, concrete and engineering plastics, epoxy adhesives provide high mechanical strength, with shear strengths of up to 50 MPa, together with excellent chemical and thermal resistance.

The Araldite® range includes standard two-component systems such as 2011-1, 2013-2, 2015-2, 2020-1 and AV138 M-2, BPA/CMR-free formulations for regulated environments, and application-specific products such as Araldite® 71 for bonding friction materials to steel or aluminium.

The Epibond® and Epocast® aerospace ranges from Huntsman meet certification requirements for high-performance composite assemblies. Permabond TA4230, a flame-retardant adhesive, and Permabond TA4610, designed for carbon composite bonding, complete the offering.

 

Methacrylate adhesives

A leading solution for structural assemblies subject to dynamic loads, methacrylate adhesives provide multi-material adhesion without primer, excellent resistance to impact and fatigue, as well as gap-filling capabilities of up to 30 mm without sagging.

Three open times are available to adapt production rates to the size of the assembly.

The Araldite® 2023 range, available with 10, 30 and 60-minute open times and certified to Lloyd’s Register for marine applications and EN 45545-2 HL3 for railway applications, together with Permabond MMA adhesives, covers a wide variety of structural bonding applications involving composites, body panels, dissimilar metal/plastic assemblies and large structures.

 

Cyanoacrylate adhesives

With instant curing triggered by surface moisture and requiring no mixing or specific dispensing equipment, cyanoacrylate adhesives are ideal for fast bonding on small surfaces such as metals, plastics, elastomers and electronic components, as well as for automated production lines.

Permabond is Samaro’s key brand for industrial cyanoacrylates, with a range covering different viscosities and application conditions:

  • Permabond 737 Black Magic is a toughened cyanoacrylate offering improved impact and peel resistance, making it suitable for assemblies exposed to dynamic stresses.
  • Permabond 105 is a versatile, low-viscosity adhesive for general-purpose applications, while Permabond A130 is specifically formulated for difficult surfaces such as plastics and rubbers.
  • Permabond 712 provides outstanding resistance to immersion and hot, humid conditions, with continuous temperature resistance up to 120°C and peak resistance up to 150°C.
  • Bostik’s Born2Bond™ range completes the offering with Born2Bond™ ULTRA K85, the market’s first 60% bio-based cyanoacrylate using Arkema Oleris® technology, designed for manufacturers seeking to reduce their carbon footprint without compromising performance.

 

Anaerobic adhesives

Anaerobic adhesives cure in the absence of oxygen and in contact with metal ions. They are widely used for threadlocking, pipe sealing and retaining cylindrical parts. Curing generally requires the adhesive to be confined between metallic surfaces.

Permabond is Samaro’s key brand for this technology, with solutions covering the main industrial applications. Permabond MH052 provides sealing for gas, water, LPG and hydrocarbon pipework up to the burst pressure of the pipe, making it suitable for plumbing and industrial fluid-handling applications.

Permabond A1044 is designed for rapid locking and sealing of metal fittings, with high resistance to aggressive chemicals, making it particularly suitable for demanding petrochemical and industrial environments.

 

Silicone sealants, MS Polymers and polyurethanes

The Dowsil™ silicone sealant range provides flexible industrial sealing across a temperature range from -50°C to +180°C.

It includes Dowsil™ 732, a versatile acetoxy silicone also available in a PMUC version for the nuclear industry, 730 FS for solvent-resistant applications, 734, and AP Clear, a neutral silicone with Shore A25 hardness and 540% elongation.

Samaro also distributes the Dowsil™ PV range for photovoltaic applications.

MS Polymer adhesive sealants from Merbenit® and Bostik combine the bonding properties of an adhesive with the flexibility of an elastic sealant, without isocyanates or silicone. They are widely used in recreational vehicles, marine construction and transportation.

Finally, structural Uralane® polyurethanes, including Uralane® 5774 A/C, cover flexible assemblies and potting applications in the energy and transportation sectors.

What criteria should you consider when choosing an industrial adhesive?

There is no single “strongest” industrial adhesive: the right solution is the one that best matches the combination of constraints involved in your application.

  1. Substrates: metals, plastics, composites, elastomers and glass. Chemical compatibility directly affects adhesion.
  2. Mechanical requirements: epoxy adhesives for high static loads, MMA adhesives for dynamic stresses and impact.
  3. Thermal and chemical conditions: service temperature and exposure to solvents, oils and UV.
  4. Process constraints: open time, curing speed and application method. Sulzer Cox single- and two-component dispensing guns, for 50 to 400 ml cartridges and 600 ml foil packs, help ensure correct mixing and consistent application of two-component adhesives.
  5. Regulatory requirements: CMR/BPA-free formulations from Araldite®, nuclear PMUC requirements for Dowsil™ 732, EN 45545-2 railway requirements for Araldite® 2023 and flame-retardant solutions such as Permabond TA4230.

 

Key industrial applications

  • Aerospace and defence: Epibond®, Epocast® and Permabond TA4610 for certified composite assemblies.
  • Railway: Araldite® 2023 certified to EN 45545-2 HL3 and Dowsil™ sealants for glazing and vehicle bodies.
  • Energy – wind, solar and hydrogen: Araldite® for blades, Dowsil™ PV for solar panels and Uralane® for potting.
  • Transportation and recreational vehicles: Merbenit®/Bostik MS Polymers for motorhomes, caravans and special-purpose vehicles.
  • Electronics and nuclear: Born2Bond™ for components and Dowsil™ 732 PMUC for nuclear power plants.

To refine your selection: visit our dedicated pages on epoxy adhesives, methacrylate adhesives, cyanoacrylate adhesives, silicone sealants and MS Polymer adhesive sealants.

Need help choosing your industrial adhesive?
Epoxy, methacrylate, cyanoacrylate, silicone, polyurethane, UV adhesive… choosing an industrial adhesive depends on the materials to be bonded, mechanical stresses, operating environment, manufacturing process and required performance. Samaro’s Bonding & Sealing expert can help you assess your application, identify the most suitable technology and determine which solutions should be evaluated according to your specifications.
Manon Marty
Brand Manager, Lubrication at Samaro

What criteria should you consider when choosing an industrial adhesive?

There is no single “strongest” industrial adhesive: the right solution is the one that best matches the combination of constraints involved in your application.

  1. Substrates: metals, plastics, composites, elastomers and glass. Chemical compatibility directly affects adhesion.
  2. Mechanical requirements: epoxy adhesives for high static loads, MMA adhesives for dynamic stresses and impact.
  3. Thermal and chemical conditions: service temperature and exposure to solvents, oils and UV.
  4. Process constraints: open time, curing speed and application method. Sulzer Cox single- and two-component dispensing guns, for 50 to 400 ml cartridges and 600 ml foil packs, help ensure correct mixing and consistent application of two-component adhesives.
  5. Regulatory requirements: CMR/BPA-free formulations from Araldite®, nuclear PMUC requirements for Dowsil™ 732, EN 45545-2 railway requirements for Araldite® 2023 and flame-retardant solutions such as Permabond TA4230.

 

Key industrial applications

  • Aerospace and defence: Epibond®, Epocast® and Permabond TA4610 for certified composite assemblies.
  • Railway: Araldite® 2023 certified to EN 45545-2 HL3 and Dowsil™ sealants for glazing and vehicle bodies.
  • Energy – wind, solar and hydrogen: Araldite® for blades, Dowsil™ PV for solar panels and Uralane® for potting.
  • Transportation and recreational vehicles: Merbenit®/Bostik MS Polymers for motorhomes, caravans and special-purpose vehicles.
  • Electronics and nuclear: Born2Bond™ for components and Dowsil™ 732 PMUC for nuclear power plants.

 

To refine your selection: visit our dedicated pages on epoxy adhesives, methacrylate adhesives, cyanoacrylate adhesives, silicone sealants and MS Polymer adhesive sealants.

FAQ

FAQ: frequently asked questions

What is the strongest adhesive for metal?
For metal bonding, two-component Araldite® epoxy adhesives can achieve shear strengths of up to 50 MPa. For assemblies exposed to impact or vibration, methacrylate adhesives may be more suitable.
What is an MS Polymer adhesive sealant?
An MS Polymer adhesive sealant combines the properties of an adhesive with those of a flexible sealant, without isocyanates or silicone. It is suitable for multi-material assemblies requiring flexibility and durable sealing.
Which adhesive should be used for food-contact applications?
Depending on the application, consider Araldite® products without CMR substances or bisphenol A, or Dowsil™ sealants with NSF H1 certification.
What is an anaerobic adhesive?
An anaerobic adhesive cures in the absence of oxygen and in contact with metal ions. It is used for threadlocking, pipe sealing and retaining cylindrical components. Permabond MH052 and A1044 cover common industrial applications.
Which adhesive should be used for aerospace composite assemblies?
Huntsman’s Epibond® and Epocast® ranges are established solutions for certified composite assemblies. Permabond TA4610 covers the bonding of carbon-fibre structures.
Which silicone sealant should be used in the nuclear sector?
Dowsil™ 732 is available in a version approved for use in nuclear power plants. It is used for sealing applications in regulated nuclear environmentsTo explore the available solutions in greater detail, visit our dedicated pages on industrial epoxy adhesives, methacrylate adhesives, cyanoacrylate adhesives, Dowsil™ silicone sealants, Merbenit® MS Polymer solutions and Sulzer Cox dispensing guns.