AIRTECH MR1

MR release films can withstand temperatures up to 315°C (600°F). These films have high elongation and good conformability. They are compatible with our high-temperature sealing tapes. This film provides a smooth surface after curing. MR1 release film is available in 25 μm (0.001 in) thickness and MR2 release film in 50 μm (0.002 in) thickness. All standard perforations are available. Please see our perforation chart in this section.

Material Type: Fluoropolymer

Elongation at Break: 400% (ASTM D 882)

Tensile Strength: 31 MPa (4,496 psi) (ASTM D 882)

Maximum Use Temperature: 315°C (600°F)

Materials to Avoid: Compatible with most resin systems

Color: Red/Blue

• The film's flexibility reduces wrinkles on parts, improving surface finish and reducing manual rework.

• Excellent demolding of cured parts: the film peels off easily and leaves a glossy finish.

• Good elongation reduces corner bridging, reducing rework on resin-rich corners.