Tectyl® 558AMC is primarily intended for spray application to enclosed boxes, seams, joints and other creviced locations of vehicles, susceptible to corrosion.
Caracteristics
Estimated Protection Period Indoor: 18 months / Flash Point : 40°C / Recommended Dry Film Thickness : 50 µm / Theoretical coverage @ recommended DFT : 7 m²/l / Viscosity @ 20°C DIN cup n°4 : 21s / Touch dry time : 3 hours / Cure time @ 20°C : 24 h / Tectyl® 558-AMC is Approved according to TR 338:2010, SFS 4086:2006, 02-12-2010 for Anti-corrosion agents for internal hollow. Penetration capability after 30 minutes (MAN TUC15-015): > 50 mm
Property
Tectyl® 558-AMC is an amber colored, solvent cutback, slightly thixotropic wax base corrosion preventive compound with good water displacing properties. Tectyl® 558-AMC is recommended as a primer coat for 2-layer systems. After a relatively short drying period Tectyl® 558-AMC can be sprayed over with other Tectyl® products up to a maximum wet film thickness of approx. 600 microns without sagging or dripping. Tectyl® 558-AMC dries to a dark amber colored, translucent, waxy, semi-firm, slightly tacky film.
Dangerous. Observe safety precautions - For professional use only
